En
119
❑
Mono
Switches between stereo and monaural for Zone2 or Zone3 output.
Settings
■
Monitor Out Assign
Select the zone for which the MONITOR OUT/ZONE OUT (COMPONENT VIDEO, S
VIDEO and VIDEO) jacks are used.
Settings
Main (default), Zone2, Zone3
• The video conversion between the analog video jacks does not work for multi-zone video output. To watch
videos played back on a video device on the zone video monitor, you need to connect the video monitor to
this unit in the same way as the video device.
■
Party Mode Set
Enables/disables switching to the party mode (p.90) for each zone.
Choice
Target: Zone2, Target: Zone3
Settings
■
Zone Scene Rename
Changes the scene names (for Zone2 or Zone3) displayed on the front display or TV
screen.
■
Setup procedure
1
Use the cursor keys to select a zone and press ENTER.
2
Use the cursor keys to select a scene to be renamed and press ENTER.
3
Press ENTER, use the cursor keys to rename, and then press ENTER again.
4
Use the cursor keys to select “OK” and press ENTER.
• To clear the entry, select “CLEAR”.
5
To exit from the menu, press ON SCREEN.
Off (default)
Produces stereo sounds in Zone2 or Zone3.
On
Produces monaural sounds in Zone2 or Zone3.
Disable
Disables switching to the party mode.
Enable (default)
Enables switching to the party mode. You can turn on/off the party
mode by pressing PARTY on the remote control.
Содержание RX-A2010
Страница 157: ... 2011 Yamaha Corporation YD505A0 OMEN1 ...