Yamaha Rhino 450 YXR45FAV, Руководство по обслуживанию

Страница: 210 / 413

4 - 79
ENG
MIDDLE GEAR
2. Remove:
• universal joint
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Remove the circlips
1
.
b. Place the universal joint in a press.
c. With a suitable diameter pipe
2
beneath
the yoke
3
, press the bearing
4
into the
pipe as shown.
NOTE:
It may be necessary to lightly tap the yoke with
a punch.
d. Repeat the steps for the opposite bearing.
e. Remove the yoke.
NOTE:
It may be necessary to lightly tap the yoke with
a punch.
▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲ ▲▲▲ ▲ ▲▲▲
3. Remove:
• middle driven pinion gear nut 1
• washer
• universal joint yoke
NOTE:
Use the universal joint holder
2
to hold the
universal joint yoke.
4. Remove:
• bearing housing assembly
1
▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼ ▼▼▼ ▼ ▼▼▼
a. Clean the outside surface of the middle
driven pinion gear.
b. Place the middle driven pinion gear onto a
hydraulic press.
CAUTION:
• Never directly press the middle driven
pinion gear end with a hydraulic press,
this will result in damage to the middle
driven pinion gear thread.
• Install the suitable socket
2
on the mid-
dle driven pinion gear end to protect the
thread from damage.
Universal joint holder
P/N. YM-04062, 90890-04062