33
Eng
lish
BA
S
IC
OPERA
T
ION
The DVD receiver provides several methods for tuning AM/FM radio stations, such as Auto Tuning, Manual Tuning and
Preset Tuning. Follow the procedure below to tune your favorite radio stations.
About the display
1
ST indicator
Lights up when receiving a strong FM radio signal.
2
indicator
Lights up when receiving a strong radio signal.
3
Preset number
Displays the preset number (page 36).
4
Band
Displays the band (AM or FM).
5
Frequency
Displays the frequency.
If the radio wave reception is strong in your area, Auto
Tuning is a quick and useful way to tune radio stations.
1
Press INPUT on the front panel repeatedly to
select AM or FM.
Each time you press the button, the mode changes
between “AM” and “FM”.
2
Press MODE to select “TUNING MODE” and
then rotate MULTI JOG clockwise quickly.
The DVD receiver automatically detects radio
stations that have strong signals for your selection.
y
You can switch the tuning mode for FM radio stations. Press
e
on the remote control to switch the tuning mode between stereo
and mono.
■
To switch the frequency step
(General model only)
Because the interstation frequency spacing differs in
different areas, you may need to switch the frequency step
mode.
North, Central and South America:
100 kHz/10 kHz
Follow the procedures below to set the frequency steps.
While the DVD receiver is set to the standby mode, press
and hold both SOUND and INPUT on the front panel,
then press and hold STANDBY/ON on the front panel for
4 seconds or longer.
The frequency step mode will be set to 100 kHz/10 kHz.
If the radio wave reception is weak in your area, tune radio
stations manually.
1
Press INPUT on the front panel repeatedly to
select “AM” or “FM”.
2
Press MODE to select “TUNING MODE” and
then rotate MULTI JOG to adjust the
frequency.
TUNING RADIO STATIONS
Tuning radio stations
automatically (Auto Tuning)
ST
1
3
4
5
2
Tuning radio stations manually
(Manual Tuning)
STANDBY/ON
PHONES
TIMER
DISPLAY
SOUND
MODE
VOLUME
INPUT
PUSH-ENTER
MULTI JOG
MODE
INPUT
MULTI JOG