Yamaha RACK Скачать руководство пользователя страница 75

Страница: 75 / 103

Configuration screens

Reference Manual

TF Series

- 75 -

SEND FROM screen menu

Press the Menu key (

) from the SEND FROM screen to display the following options.

DCA ASSIGN screen

Allows you to group channels together by assigning them to DCA groups.

Channel display area

Displays the channels that are assigned to the current DCA group.

DCA ASSIGN buttons

Allow you to select which channels are assigned to the current DCA group.
Selected channels are highlighted.

CH VIEW button

Displays the CH VIEW screen. (



page 63

)

Recall Safe button (V1.1 and later)

Turns recall safe on and off for the corresponding channel.
You can display the RECALL SAFE screen by touching the jump button in the right corner
of the Recall Safe button.

All Pre

Turns on all Pre buttons.

All Post

Turns off all Pre buttons.

All Nominal (V2.0 and later)

Sets all SEND levels to nominal (0 dB).

Dup. STEREO (V2.0 and later)

Duplicate STEREO. Copies each channel's fader
level and applies it to the SEND level.

NOTE

This menu is not available for MATRIX channels 1–4.

Содержание RACK








































































































Результаты поиска

Содержание RACK

Отзывы:

Похожие инструкции для RACK

Бренды по названию

Популярные бренды

Yamaha RACK, Справочное руководство

Результаты поиска

Содержание RACK

Отзывы:

Похожие инструкции для RACK

Бренды по названию

Популярные бренды