Toolbar
Reference Manual
TF Series
- 17 -
5
Follow playback button
When this button is turned on during continuous playback, the file that is currently
playing is highlighted in the file list.
6
File information
When playing back an MP3 file, the file's bit rate and the current playback location are
displayed here.
When playing back a WAV file, the file's sample rate and the current playback location
are displayed here.
When recording, the WAV file's sample rate and the elapsed recording time are
displayed here.
7
Playback mode selector button
You can select the desired playback mode.
Touch the button to toggle through the available modes.
: SINGLE playback; the file is played and then playback stops.
: SINGLE REPEAT; the file plays repeatedly until you stop playback.
: ALL; all files with checkboxes turned on in the file list are played back one after
another, and then playback stops.
: ALL REPEAT; all files with checkboxes turned on in the file list are played back one
after another, and then playback repeats until you stop playback.
8
Previous button
Moves the playback location to the beginning of the current file or to the beginning of
the previous file.
9
Stop button
Stops playback and recording.
0
Play/pause button
Starts and pauses playback.
A
Next button
Moves the playback location to the beginning of the next file.
B
Record button
Sets the console to record-ready mode.
C
File name edit button
Allows you to edit the file's name.
NOTE
When an iPad or other iOS device is connected, "iOS device is connected. Use transport control on the
device." is displayed, and the playback button is not displayed. Use the corresponding app on the iOS
device to control playback.
Recording
1.
Connect a compatible USB storage device to the iPad connector.
2.
Touch the record button.
The record button begins flashing to indicate that the console is in record-ready mode.
3.
When you're ready to start recording, touch the play/pause button.
The record button remains lit during recording.
You can touch the play/pause button to pause and resume recording.
4.
When you're ready to stop recording, touch the stop button.
The recorded file is named automatically based on the console's date and time setting.
5.
If necessary, touch the file name edit button and change the file name.
