Configuration screens
Reference Manual
TF Series
- 63 -
CH VIEW screen
Provides an overview of all the settings for a channel.
You can change settings using this screen, in addition to the corresponding feature's
configuration screen.
Items displayed on this screen vary depending on the type of channel selected.
CH1–CH32
1
Channel name
Touch to display the CH NAME screen.
Touch
to display information for a different channel.
2
Recall Safe button
Turns recall safe on and off for the corresponding channel.
You can display the RECALL SAFE screen (
) by touching the jump button in
the right corner of the Recall Safe button.
3
Input source indicator
Displays the input channel's input source. You can select the input source on the INPUT
screen.
4
Mute Safe button
Touch to temporarily exclude the selected channel from the input mute group.
If you mute the input mute group, any channels in that group that have mute safe
enabled will not be muted.
5
Boxes
Touch to display the configuration screen for the corresponding feature.
You can touch the EQ, GATE, and COMP buttons displayed here to turn the
corresponding feature on and off.
HA box
: Displays the INPUT screen. (
EQ box
: Displays the EQ screen. (
GATE box
: Displays the GATE screen. (
COMP box
: Displays the COMP screen. (
6
Channel on/off button
Turns the selected channel on and off.
7
Channel pan slider
Adjusts the pan for the selected channel.
8
FX1/FX2 boxes
Displays the effect type.
When selected, you can use the [TOUCH AND TURN] knob to adjust the effects send
level. You can also display the corresponding effect's configuration screen by touching
again.
Each box displays the amount of signal from the selected channel that is sent to the
corresponding effects module.
Send level, the selected channel's fader level, and the actual send level grouped with the
DCA is displayed in the triangular bar.
The information displayed here indicates whether the signal sent to the effects module
is the pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader
signal is displayed in gray.
9
SEND TO AUX box
Touch when selected to display the SEND TO AUX screen.
Displays the amount of signal from the selected channel that is sent to each AUX bus.
Send level, the selected channel's fader level, and the actual send level grouped with the
DCA is displayed in the horizontal bar.
The information displayed here indicates whether the signal sent to the AUX bus is the
pre-fader or post-fader signal. Pre-fader signal is displayed in green; post-fader signal is
displayed in gray.
0
ASSIGN box
Displays the ASSIGN screen. (
)
A
Channel output level slider
Adjusts the fader level for the selected channel.
B
Channel output level meter
Displays the channel's output signal level.
չ
պ
ջ
ռ
ս
վ
տ
ճ
ձ
ղ
մ
յ ն շ ո
