Yamaha QS300, Руководство пользователя

Страница: 144 / 217

140
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
00: Undo/Redo
This Job will “undo” any other song Job, edit, or record
function if it is executed before any other operation is
performed. In all cases, the affected data is restored to the
previous state before performing the Job, edit, or record
operation. This Job will also undo the last Undo operation
(Redo).
The name of the last operation performed appears in the
display (i.e., the operation which will be “undone”). In the
example display above, a Realtime Record operation will
be undone.
Last executed operation (corresponding
mode appears above in reverse display).
Press
E
to execute the Undo/Redo Job. A “Com-
pleted” message appears briefly when the Job is done.
NOTE:
• The last operation performed is “forgotten” by the Undo Job
whenever the Song or Phrase step record mode is engaged,
even if the step record mode is exited without actually
recording any data.
• The Undo operation cannot be used with the following jobs:
Song Name (page 23), Style Name (in Pattern Jobs, page
168), and Phrase Name (in Phrase Jobs, page 177).
To use the Song Jobs: ...........................................................
1.
Enter the Song mode by pressing
s
.
2.
Press
j
to call up the Song Jobs page.
3.
Select the desired Job number/title.
Enter the Job number directly from the numeric keypad,
or select the Job by moving the highlight in the normal
manner. You can also scroll up and down through the
list in “pages” by simultaneously holding down the
(
button and pressing the appropriate cursor
button (
<
or
>
).
4.
Press
E
to call up the desired Job.
5.
For help in using a specific Job, refer to the appro-
priate explanation in this section.
To exit from the Song Jobs, press the
)
button or any
of the MODE buttons.