Yamaha PW SYSTEM Скачать руководство пользователя

Страница: 91 / 102

Symptom

Check

Action

Both side battery capacity indicator lamps

are flashing simultaneously.

The Battery Pack protection

feature has been activated

and the system cannot be

used. Replace the Battery

Pack at a bicycle dealer as

soon as possible.

(Rear Carrier Battery) (Down Tube Battery)

(Multi Location Battery)

(External Crossover Battery)

The Battery Charger emits abnormal

noises, foul odors or smoke.

Unplug the charging plug

and immediately cease

operation.

Have a bicycle dealer

inspect your bicycle.

The Battery Charger becomes hot.

It is normal for

the Battery

Charger to

become

somewhat warm

during charging.

If the Battery Charger is too

hot to be touched by hand,

unplug the charging plug,

wait for it to cool, and

consult a bicycle dealer.

After charging, all of the battery capacity

indicator lamps do not light up when the

battery capacity indicator button “ ” is

pressed.

Has the

charging plug

been unplugged

or the Battery

Pack removed

during

charging?

Charge the Battery Pack

again.

Did you start

charging with

the Battery

Pack at a high

temperature,

such as

immediately

after use?

Move to a location where

the Battery Pack

temperature can reach the

range where charging is

possible (15–25 °C), and

then start charging again.

After disconnecting the charging plug on

the Battery Charger from the Battery Pack,

the battery capacity indicator lamps

continue to light up.

Is the charging

connector on

the Battery

Pack wet?

Clean the charging

connector and charging

plug. Then dry them.

Содержание PW SYSTEM







































































































Результаты поиска

Содержание PW SYSTEM

Отзывы:

Похожие инструкции для PW SYSTEM

Бренды по названию

Популярные бренды

Yamaha PW SYSTEM, Руководство пользователя

Результаты поиска

Содержание PW SYSTEM

Отзывы:

Похожие инструкции для PW SYSTEM

Бренды по названию

Популярные бренды