Yamaha PW SYSTEM Скачать руководство пользователя

Страница: 58 / 102

Charging the Battery Pack removed from

the bicycle

1. Turn the Display Unit off.

2. Insert the key into the battery lock, and turn it to re-

lease the battery lock.

3. Remove the Battery Pack.

WARNING

Use both hands when removing the Battery Pack. Do

not drop the Battery Pack or subject it to impact. Do-

ing so could cause the Battery Pack to become hot or

catch fire, resulting in serious injury or property dam-

age.

TIP

How to remove Multi Location Batteries varies between

bicycles. For more information, see the instruction manual

supplied with the bicycle.

4. Connect the power plug of the Battery Charger to a

household power outlet.

5. Remove the cap from the charging connector on the

Battery Pack, and connect it to the charging plug on

the Battery Charger.

The Multi Location Battery 400/500 and External

Crossover Battery 400/500 are not equipped with a

cap.

NOTICE

• Do not connect the charging plug of the Battery

Charger with the charging connector of the Battery

Pack in a wet state.

Otherwise, the Battery Charger and Battery Pack

may malfunction.

• Be sure to connect the charging plug only after the

charging connector on the Battery Pack is com-

pletely dry.

Otherwise, the Battery Charger and Battery Pack

may malfunction.

• Do not apply excessive force to the charging plug

or pull on the cord with the charging plug connect-

ed to the Battery Pack.

Otherwise, the charging plug or connector may be

damaged.

Charging connector

Cap

Charging connector

Содержание PW SYSTEM







































































































Результаты поиска

Содержание PW SYSTEM

Отзывы:

Похожие инструкции для PW SYSTEM

Бренды по названию

Популярные бренды

Yamaha PW SYSTEM, Руководство пользователя

Результаты поиска

Содержание PW SYSTEM

Отзывы:

Похожие инструкции для PW SYSTEM

Бренды по названию

Популярные бренды