Yamaha PW SYSTEM Скачать руководство пользователя

Страница: 43 / 102



Trip time

This displays the total riding time since it was last reset.

When you turn off the power, the data up to that point will

be saved.

To reset the trip time, press the assist mode switch (up)

and assist mode switch (down) simultaneously for 2 sec-

onds or longer when the trip time is displayed on the func-

tion display. Or see “Settings”.

TIP

If your bicycle speed is less than 2.0 km/h or 1.2 MPH, the

trip time will not be accumulated.

Headlight on/off

For models equipped with a headlight or taillight powered

by the Battery Pack, each time you press the light switch,

the headlight and taillight will turn on and off.

TIP

• Display backlight operates simultaneously with the light

switch.

• As the light switch is turned on or off, the display back-

light will light accordingly. For the procedure of select-

ing the brightness condition, see “Settings”.

• The on or off status of the headlight operates simulta-

neously with the on or off status of the light indicator.

Light indicator

Содержание PW SYSTEM







































































































Результаты поиска

Содержание PW SYSTEM

Отзывы:

Похожие инструкции для PW SYSTEM

Бренды по названию

Популярные бренды

Yamaha PW SYSTEM, Руководство пользователя

Результаты поиска

Содержание PW SYSTEM

Отзывы:

Похожие инструкции для PW SYSTEM

Бренды по названию

Популярные бренды