Yamaha NUAGE MASTER Ncs500-CT, Руководство по эксплуатации

Страница: 21 / 108

Description of the Device
NUAGE MASTER Operation Manual 21
When the pop-up window is shown, the [Input keys] have
the following functions.
You can set the locator position by [SET] and [LEFT]/
[RIGHT] in the TRANSPORT section. For details, refer to
the description of [LEFT] (
page 10 ) in the TRANSPORT
section.
7
[Input keys]
Inputs the parameter. The input parameter changes
depending on the [Input keys] mode. For details, refer to
the description of the buttons for changing the mode,
such as [LOCATE], [MARKER], etc.
USER ASSIGNABLE Section
Overview
This section is used to execute assigned functions. For
details on assigning functions, see “User Assignable
Settings” (
page 44 ) in NUAGE FADER Hardware Setup.
Controls and Functions
1
[Display access]
Calls up the “USER ASSIGNABLE Page” ( page 38 ) in the
[Multi function display]. When the USER ASSIGNABLE
Page is shown, you can toggle among the banks of the
USER ASSIGNABLE Page.
2
[U1] – [U12]
Executes the assigned function. The button lights while
held down.
[Input keys] Function
[0] – [9] For inputting numbers to the input position.
[

]/[

] Moves the input digit to right and left.
[BACK SPACE] Deletes the number at the input position.
[CLEAR] Deletes all input numbers.
[SET] Cancels the input then closes the pop-up
window.
[PREV -] Adds -1 to the input number.
[NEXT +] Adds +1 to the input number.
[CYCLE .] Selects the type of Marker to be set. When
off, this indicates Marker, and when lit
indicates Cycle Marker.
[ESC] Cancels the input then closes the pop-up
window.
[ENTER] Determines the input then closes the pop-up
window.
Lamp Description
Dim A function can be used.
Off A function cannot be used.
1
2