Description of the Device
NUAGE MASTER Operation Manual
17
2
Offset for addition/subtraction function
Not applicable.
3
Locate To
Inputs Project Cursor position.
When the pop-up window for the Locate function is
shown, the [Input keys] have the following functions.
Subtraction Function
In the Subtraction function, you can set the Project Cursor
position by inputting a subtraction value. When you press
[PREV -] in Locate mode, the pop-up window for the
Subtraction function is shown on the [Multi function
display].
1
Current Position
Displays the current Project Cursor position.
2
Offset for subtraction function
Inputs the subtraction value.
3
Locate To
Displays the Project Cursor position including the
subtraction value.
When the Subtraction function pop-up window is shown,
the [Input keys] have the following functions.
Addition Function
In the Addition function, you can set the Project Cursor
position by inputting an addition value. To call up the
Addition function in the [Multi function display], press
[NEXT +] in the Locate mode.
1
Current Position
Displays the current Project Cursor position.
2
Offset for addition function
Inputs the addition value.
3
Locate To
Displays the Project Cursor position including the addition
value.
[Input keys]
Function
[0] – [9]
For inputting numbers to the input position.
[
]/[
]
Moves the input digit right and left.
[BACK SPACE]
Deletes the number at the input position.
[CLEAR]
Deletes all input numbers.
[SET]
Selects the Set mode (the button lights).
[PREV -]
Selects the Subtraction function (the button
lights).
[NEXT +]
Selects the Addition function (the button
lights).
[CYCLE .]
If a number is present at the input position,
moves the input digit right. If no number is
present at the input position, sets the
number to 0 and moves the input digit right.
[ESC]
Cancels the input then closes the pop-up
window.
[ENTER]
Determines the input then closes the pop-up
window.
1
2
3
[Input keys]
Function
[0] – [9]
For inputting numbers to the input position.
[
]/[
]
Moves the input digit right and left.
[BACK SPACE]
Deletes the number at the input position.
[CLEAR]
Deletes all input numbers.
[SET]
Selects the Set mode (the button lights).
[PREV -]
Sets the Project Cursor position by inputting
the subtraction value. To adjust the value
continuously, hold down the button.
[NEXT +]
Selects the Addition function (the button
lights).
[CYCLE .]
Moves the input digit to the right.
[ESC]
Cancels the input then closes the pop-up
window.
[ENTER]
Determines the input then closes the pop-up
window.
1
2
3
