Added functions in NUAGE V1.7
74
New Settings for Saving
Project Files (Nuage Master)
You can now select whether to overwrite the project file or
save as a new file when you press [SAVE] in the
GENERAL CONTROL section.
Operation
Numbers in the illustration and screen shot below correspond to
the instruction steps.
1.
Press [SETUP] in the MULTI FUNCTION
DISPLAY section.
2.
In the [Multi function display], touch the
“PAGE 3” tab.
3.
Select the method for saving project files
using the [Multi function knob] that
corresponds to “Save Button Operation.”
NOTE
The file name for a project file saved as a new file adds
branch numbers such as “-01” and “-02” to the original file
name.
Support for Avid Pro Tools
Shortcut Keys (Nuage Master)
You can now assign Avid Pro Tools shortcut keys to Nuage
Master's USER ASSIGNABLE keys.
Operation
Numbers in the screen shot below correspond to the instruction
steps.
1.
On a Mac with Avid Pro Tools, click
or
on the menu bar.
NOTE
If the icons are not displayed, install NUAGE PT Bridge in
TOOLS for NUAGE.
2.
Click “User Assignable Setup.”
3.
Click any USER ASSIGNABLE key on the
window.
The shortcut key assigned to the key you clicked is
displayed in the “Type in Key” section under “Shortcut
Key” on the window. (A blank is displayed if a shortcut
key is not assigned.)
4.
Click a shortcut key (or blank) displayed in the
Type in Key section, then press a key on the
computer keyboard.
NOTE
• You can register up to four keys to a USER ASSIGNABLE
key. For example, if you register “.” (period), “1,” and “.”
(period) to [U2], when you press [U2], it is recognized by
the system that you pressed these three buttons in order,
and memory location 1 will be called up.
• You can register keys such as
⌘
(Command), ^ (Control),
and
⇧
(Shift) in combination with other keys.
• If you press a key that cannot be used as a shortcut key,
“Not Available” will be displayed, and that key will not be
registered.
5.
Click the “Assign” button.
The change in the shortcut keys is reflected in the on-
screen USER ASSIGNABLE key.
6.
Click “OK.”
The change in the shortcut keys is reflected in the
Nuage Master USER ASSIGNABLE keys.
Save
Overwrites the project file.
Ver.
Saves the project file as a new file.
