Added functions in NUAGE V2.0
55
Selecting a monitor source or a cue output (Nuage Master)
Using the MONITOR SOURCE section of Nuage Master, you can select an audio source or cue output for monitoring.
MONITOR SOURCE Section
Monitor Source page
1
Switches the operable controls between Main Monitor output and Headphone output.
2
When turned On (lit), multiple Monitor Sources can be selected at the same time.
3
Select an audio source to be monitored from Monitor Source 1-8.
4
Select an audio source to be monitored from Cue output 1-8.
5
Turns the Downmix audio output on (lit) or off. (Only when the Main Monitor output is selected.)
6
When the Monitor Source is selected, adjust each Monitor Source input level.
When the Cue output is selected, set the send level which sends from Cue Source 1-8 to the selected Cue output.
These controls are linked with MMP1 Editor controls and MMP1 Controller controls enclosed in the red frames.
1
2
3
4
1
Displays the “Monitor Source” page on the [Multi function
display].
2
When turned on (lit), multiple Monitor Sources can be selected at
the same time.
3
Select an audio source to be monitored from Monitor Source 1-8.
4
Select an audio source to be monitored from Cue output 1-4.
2
5
3
4
1
6
