Description of the Software Programs
NUAGE MASTER Operation Manual
44
NUAGE MASTER Setup
Overview
This software is for configuring the general settings of
Nuage Master from Nuendo. You can configure settings
such as the user assignable buttons on the device or
“USER ASSIGNABLE page” (
). To open this
window, click the Nuendo menu “Devices”
“NUAGE
MASTER Setup.”
NUAGE MASTER Setup has the following windows.
• User Assignable window (
• Edit window (
)
• Automation window (
)
• Communication window (
To select the desired window, click the corresponding tab
on the upper side of the window.
User Assignable Window
Overview
This window is for configuring the function of the buttons
in the “USER ASSIGNABLE section” (
) or “USER
ASSIGNABLE page” (
).
To configure the buttons in the USER ASSIGNABLE
section, click “Panel.” To configure the buttons on the
USER ASSIGNABLE page, click “Touch panel.”
To select the desired bank when selecting “Touch panel,”
click one of “BANK 1” – “BANK 4.”
Controls and Functions
1
User Assignable Settings
Assigns functions to the buttons. First, click “Category” to
select the category. Next, click “Command” to select the
command. When you check the “Repeat” box for the
function, the corresponding function will operate
continuously by holding down the button. You can input
the desired function name to “Title.”
Edit Window
Overview
This window is for configuring the function of the buttons
in the “EDIT page” (
To select the desired bank, click one of “BANK 1” –
“BANK 4.”
Controls and Functions
1
1