25
Recording Functions
User’s Guide
At the punch-in location, the START indicator will switch off, the IN indicator will light, and the
indicator above the REC/PAUSE key and the REC SELECT - TRACK indicator will light.
Play the punch-in part.
At the punch-out location, the IN indicator and indicator above the REC/PAUSE key will switch
off, the REC SELECT - TRACK indicator will flash, the OUT indicator will light, and monitor source
will switch back to the tape.
At the post-roll point, the OUT indicator will switch off, the START indicator will begin flashing, the
indicator above the PLAY key will flash in a pattern (check waiting condition), and the tape is
automatically rewound back to the pre-roll point.
When tape is rewound, the AUTO PUNCH and START indicators will light.
Check the recording
11)
Press the PLAY key again to play back the tape.
The MT4X will automatically play from the pre-roll point to the post-roll point.
If the resulting recording is good, press the AUTO PUNCH I/O key to cancel the automatic
punch-in/out function. The punch-in and punch-out points as well as the pre-roll and post-roll
points are cleared. If you want to perform another automatic punch-in/out recording, you will have
to start from step 3.
If the resulting recording is not good, press the REHE key and repeat from step 7.
If the pre-roll or post-roll points need to be changed, press the CLEAR key and repeat from step 3.
TAPE
9.5
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1
2
3
4
L
R
IN
AUTO PUNCH
PLAY
REC/PAUSE
REHE
OUT
TAPE
9.5
+9
6
3
0
3
6
10
-20
+9
6
3
0
3
6
10
-20
1
2
3
4
L
R
AUTO PUNCH
PLAY
REC/PAUSE
REHE
