21
Recording Functions
User’s Guide
To overdub another part, simply repeat steps 1 to 17.
Punch-in/out recording
This technique is used to re-record short sections, correct mistakes, or add new sections to silent passages.
You play your part while punching in and out to start and stop the recorder. For the greatest precision, you
should use the advanced automatic punch-in/out features of the MT4X.
However, it is reasonably easy to punch-in manually. If you have a footswitch, you can also punch in and
out using your foot. This keeps your hands free for making music.
There are three basic methods for punch-in/out recording:
• Using the automatic punch-in/out function.
• Using the REC/PAUSE key and the PLAY key.
• Using the optional footswitch.
Using the automatic punch-in/out function
With the automatic punch-in/out function, you specify the punch-in and punch-out locations. The
operation is then carried out automatically. If you make a mistake, you can repeat the operation with
precision.
1)
Connect the input source, set the input select key, and adjust the GAIN control and channel fader so
that the mixer setting is identical to the previous recording.
2)
Press the REC SELECT key for the track you want to punch-in.
Tip:
You should ensure that the mixer and instrument settings are identical to the original recording. If you
record a punch-in at a different volume level, for example, it will not blend into the previously-recorded track and
your edit will be obvious. You will find keeping accurate track sheets invaluable to making invisible punch-in/out
recordings. See "Tracking Sheet" on page 49.
Note:
If you are using an optional FC5 footswitch, plug it into the PUNCH I/O footswitch connector.
Drum track
Bassguitar track
Track to be overdubbed
Track 1
Track 1
Track 2
Track 2
Track 3
Track 3
Track 4
Track 4
