69
MONTAGE6/MONTAGE7
LCD display
Test items and judging conditions
30 : OUTPUT-L (-6dB)
Checks each output level from the L channel of the jacks.
1)
Connect the level meter to an output jack.
2)
Set the [MASTER VOLUME] control to the maximum position.
3)
Press the [ENTER] button to produce the 1kHz sine wave sound. “
ON
” is shown on the LCD.
4) Measure the output level and confirm that the measured values are within the specified range.
[PHONES]
(33
-ohms
load)
PHONES L: -0.5 dBu±2 dB
PHONES R: -54 dBu or less
[OUTPUT (Balanced)]
(600
-ohms
load)
OUTPUT L/MONO (HOT/COLD): +8.7 dBu±2 dB
OUTPUT R (HOT/COLD): -89 dBu or less
OUTPUT L/MONO (HOT/COLD): +4.3 dBu±2 dB
OUTPUT R (Unconnected)
[ASSIGNABLE OUTPUT (Balanced)]
(600
-ohms
load)
OUTPUT L (HOT/COLD): +8.7 dBu±2 dB
OUTPUT R (HOT/COLD): -89 dBu or less
5)
Press the [EXIT] button, and testing is finished and the display is changed to the test item selection
screen.
31 : OUTPUT-R (-6dB)
Checks each output level from the R channel of the jacks.
1)
Connect the level meter to an output jack.
2)
Set the [MASTER VOLUME] control to the maximum position.
3)
Press the [ENTER] button to produce the 1kHz sine wave sound. “
ON
” is shown on the LCD.
4) Measure the output level and confirm that the measured values are within the specified range.
[PHONES]
(33
-ohms
load)
PHONES L: -54 dBu or less
PHONES R: -0.5 dBu±2 dB
[OUTPUT (Balanced)]
(600
-ohms
load)
OUTPUT L/MONO (HOT/COLD): -89 dBu or less
OUTPUT R (HOT/COLD): +8.7 dBu±2 dB
[ASSIGNABLE OUTPUT (Balanced)]
(600
-ohms
load)
OUTPUT L (HOT/COLD): -89 dBu or less
OUTPUT R (HOT/COLD): +8.7 dBu±2 dB
5)
Press the [EXIT] button, and testing is finished and the display is changed to the test item selection
screen.
32 : Panel W Check (SW,
LED)
Checks whether switches and LEDs on the PNW circuit board work properly or not.
1)
Press the [ENTER] button, and “
Press ASSIGN 1 / LED=RED
” is shown on the LCD.
2) Press the applicable button, and a sine wave sound is produced while the button is pressed. If the
button has LED, it lights up.
Note:
If a wrong button is pressed, “
NG
” is shown and no sound is produced.
3)
Release the button, and the display changes to “
Press xxx / LED=xxx
(button name to be pressed
next)”.
4) Check buttons on the panel one after another in the specified order.
For the order to check switches, refer to page 73.
5)
When pressing all buttons is completed, “
OK
” is shown on the LCD.
6)
When OK of the test result is shown, testing is over and the display is changed to the test item
selection screen.
Содержание Montage 6
