manualshive.com logo in svg

Yamaha MAJESTY YP250, Руководство пользователя

Поделиться
Скачать
Yamaha MAJESTY YP250 Скачать руководство пользователя страница 76

6-25

PERIODIC MAINTENANCE AND MINOR REPAIR

6

EW000077

w

Because loading has an enormous
impact on the handling, braking,
performance and safety character-
istics of your scooter, you should
keep the following precautions in
mind.

8

8

NEVER OVERLOAD THE
SCOOTER! Operation of an
overloaded scooter may result
in tire damage, loss of control,
or severe injury. Make sure
that the total weight of rider,
cargo, and accessories does
not exceed the specified maxi-
mum load for the vehicle.

8

8

Do not carry along loosely
packed items, which can shift
during a ride.

8

8

Securely pack the heaviest
items close to the center of the
scooter and distribute the
weight evenly on both sides.

Tire inspection

The tires must be checked before
each ride. If the center tread depth
reaches the specified limit, if the tire
has a nail or glass fragments in it, or
if the sidewall is cracked, have a
Yamaha dealer replace the tire imme-
diately.

1

a

1.

Sidewall

a.

Tire tread depth

8

8

Adjust the suspension and tire
air pressure with regard to the
load.

8

8

Check the tire condition and
air pressure before each ride.

Minimum tire tread depth 
(front and rear)

1.6 mm

5SJ-28199-E2  8/9/02 4:06 PM  Page 74

Содержание MAJESTY YP250





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды