manualshive.com logo in svg

Yamaha MAJESTY YP250, Руководство пользователя

Поделиться
Скачать
Yamaha MAJESTY YP250 Скачать руководство пользователя страница 68

6-17

PERIODIC MAINTENANCE AND MINOR REPAIR

6

To reset the oil change indicator
light

1. Turn the key to “ON”.

1

1.

Reset button

NOTE:

If the engine oil is changed before the
oil change indicator light comes on
(i.e. before the periodic oil change
interval has been reached), the indi-
cator light must be reset after the oil
change for the next periodic oil
change to be indicated at the correct
time. To reset the oil change indicator
light before the periodic oil change
interval has been reached, follow the
above procedure, but note that the
indicator light will come on for 
1.4 seconds after releasing the reset
button, otherwise repeat the proce-
dure.

2. Hold the reset button pushed for

two to five seconds.

3. Release the reset button, and

the oil change indicator light will
go off.

5SJ-28199-E2  8/9/02 4:06 PM  Page 66

Содержание MAJESTY YP250





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды