Yamaha MAJESTY 400 Скачать руководство пользователя страница 78

Страница: 78 / 101

PERIODIC MAINTENANCE AND MINOR REPAIR

6-37

5. Remove the socket (together with

the bulb) by turning it counter-
clockwise.

6. To remove the defective turn sig-

nal light bulb, push it in and turn it

counterclockwise.

7. To insert a new turn signal light

bulb into the socket, push it in, and
then turn it clockwise until it stops.

8. Install the socket (together with the

bulb) by turning it clockwise.

9. Place the turn signal light unit in

the original position, and then in-
stall the screws.

10. Install the windshield by installing

the screws.

11. Install panel A.

EAU34260

Replacing a rear turn signal
light bulb

1. Place the scooter on the center-

stand.

2. Remove cowling C for replacing

the left turn signal light bulb or
cowling D for replacing the right
turn signal light bulb. (See
page 6-8.)

3. Remove the socket (together with

the turn signal light bulb) by turning
it counterclockwise.

4. Remove the defective bulb by

pushing it in and turning it counter-
clockwise.

1. Screw
2. Front turn signal light unit

1. Turn signal light bulb socket

Содержание MAJESTY 400






































































































Результаты поиска

Содержание MAJESTY 400

Отзывы:

Yamaha MAJESTY 400, Руководство пользователя, Страница: 78 / 101

Результаты поиска

Содержание MAJESTY 400

Отзывы: