manualshive.com logo in svg

Yamaha MAJESTY 400, Руководство пользователя, Страница: 49 / 101

Поделиться
Скачать
Yamaha MAJESTY 400 Скачать руководство пользователя страница 49

 

PERIODIC MAINTENANCE AND MINOR REPAIR

 

6-8

 

2

3

4

5

6

7

8

9

 

EAU18711

 

Removing and installing
cowlings and panels 

 

The cowlings and panels shown need
to be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each time
a cowling or panel needs to be re-
moved and installed.

 

EAU34281

 

Cowling A

 

To remove the cowling

1. Open the rider seat. (See

page 3-11.)

2. Remove the quick fasteners in the

rear storage compartment, and
then pull the cowling off as shown.

NOTE:

 

The quick fastener is removed by push-
ing the center pin in with a screwdriver,

 

and then pulling the fastener out.

To install the cowling

1. Place the cowling in the original

position, and then install the quick
fasteners.

NOTE:

 

To install the quick fastener, push the
center pin out so that it will protrude
from the fastener head, insert the fas-
tener into the cowling, and then push
the protruding pin in until it is flush with

 

the fastener head.

2. Close the rider seat.

 

Cowling B

 

To remove the cowling

1. Remove the screws.

 

1. Panel A
2. Cowling C
3. Cowling A
4. Cowling B
5. Panel B
6. Cowling E

2

3 4

5

6

1

 

1. Cowling D

1

 

1. Quick fastener
2. Cowling A

1

2

Содержание MAJESTY 400






































































































Отзывы:

Нет отзывов