Yamaha MAJESTY 400 Скачать руководство пользователя страница 54

Страница: 54 / 101

PERIODIC MAINTENANCE AND MINOR REPAIR

6-13

necessary.

To install the spark plug

1. Measure the spark plug gap with a

wire thickness gauge and, if nec-
essary, adjust the gap to specifica-
tion.

2. Clean the surface of the spark plug

gasket and its mating surface, and
then wipe off any grime from the
spark plug threads.

3. Install the spark plug with the

spark plug wrench, and then tight-
en it to the specified torque.

NOTE:

If a torque wrench is not available when
installing a spark plug, a good estimate
of the correct torque is 1/4–1/2 turn
past finger tight. However, the spark
plug should be tightened to the speci-

fied torque as soon as possible.

4. Install the spark plug cap.

NOTE:

Make sure the spark plug wire is fas-

tened in the clamp as shown.

5. Install the spark plug cover by in-

stalling the screws.

6. Place the storage compartment

mat in the original position.

7. Close the rider seat.

Specified spark plug:

NGK/CR7E

1. Spark plug gap

Spark plug gap:

0.7–0.8 mm (0.028–0.031 in)

Tightening torque:

Spark plug:

12.5 Nm (1.25 m·kgf, 9 ft·lbf)

1. Spark plug cap
2. Spark plug wire clamp

Содержание MAJESTY 400






































































































Результаты поиска

Содержание MAJESTY 400

Отзывы:

Yamaha MAJESTY 400, Руководство пользователя, Страница: 54 / 101

Результаты поиска

Содержание MAJESTY 400

Отзывы: