Yamaha MAJESTY 400 Скачать руководство пользователя страница 30

Страница: 30 / 101

INSTRUMENT AND CONTROL FUNCTIONS

3-12

To close the rider seat

1. Fold the rider seat down, and then

push it down to lock it in place.

2. Remove the key from the main

switch if the scooter will be left un-
attended.

NOTE:

Make sure that the rider seat is properly

secured before riding.

Passenger seat

To remove the passenger seat

1. Open the rider seat.
2. Remove the bolt, and then pull the

passenger seat forward.

To install the passenger seat

1. Insert the projections on the pas-

senger seat into the holders as
shown, place the passenger seat
in the original position, and then in-
stall the bolt.

2. Close the rider seat.

NOTE:

Make sure that the passenger seat is

properly secured before riding.

EAU34150

Adjusting the rider seat

The rider seat can be adjusted as fol-
lows to change the riding position.

1. Open the rider seat. (See

page 3-11.)

2. Remove the bolts.

1. Passenger seat
2. Bolt

1. Passenger seat
2. Seat holder

1. Rider seat

Содержание MAJESTY 400






































































































Результаты поиска

Содержание MAJESTY 400

Отзывы:

Yamaha MAJESTY 400, Руководство пользователя, Страница: 30 / 101

Результаты поиска

Содержание MAJESTY 400

Отзывы: