Yamaha MAJESTY 400 Скачать руководство пользователя страница 34

Страница: 34 / 101

INSTRUMENT AND CONTROL FUNCTIONS

3-16

With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
3. Turn the key on.
4. Keep the front or rear brake applied.
5. Push the start switch.

Does the engine start?

With the engine still off:
6. Move the sidestand up.
7. Keep the front or rear brake applied.
8. Push the start switch.

Does the engine start?

With the engine still running:
9. Move the sidestand down.

Does the engine stall?

The system is OK.

The scooter can be ridden.

This check is most reliable if performed with
a warmed-up engine.

The sidestand switch may be defective.

The scooter should not be ridden

until

checked by a Yamaha dealer.

The brake switch may be defective.

The scooter should not be ridden

until

checked by a Yamaha dealer.

The sidestand switch may be defective.

The scooter should not be ridden

until

checked by a Yamaha dealer.

YES

NOTE:

Содержание MAJESTY 400






































































































Результаты поиска

Содержание MAJESTY 400

Отзывы:

Yamaha MAJESTY 400, Руководство пользователя, Страница: 34 / 101

Результаты поиска

Содержание MAJESTY 400

Отзывы: