Yamaha MAJESTY 400 Скачать руководство пользователя страница 39

Страница: 39 / 101

OPERATION AND IMPORTANT RIDING POINTS

5-2

EAU16760

Starting off

NOTE:

Before starting off, allow the engine to

warm up.

1. While pulling the rear brake lever

with your left hand and holding the
grab bar with your right hand, push
the scooter off the centerstand.

2. Sit astride the seat, and then ad-

just the rear view mirrors.

3. Switch the turn signal on.
4. Check for oncoming traffic, and

then slowly turn the throttle grip (on
the right) in order to take off.

5. Switch the turn signal off.

EAU16780

Acceleration and deceleration

The speed can be adjusted by opening
and closing the throttle. To increase the
speed, turn the throttle grip in direction
(a). To reduce the speed, turn the throt-
tle grip in direction (b).

EAU16791

Braking

1. Close the throttle completely.
2. Apply both front and rear brakes

simultaneously while gradually in-
creasing the pressure.

Front

1. Grab bar

(a)

(b)

Содержание MAJESTY 400






































































































Результаты поиска

Содержание MAJESTY 400

Отзывы:

Yamaha MAJESTY 400, Руководство пользователя, Страница: 39 / 101

Результаты поиска

Содержание MAJESTY 400

Отзывы: