Yamaha FZ1 FZS1000N, Руководство пользователя, Страница: 24 / 123

INSTRUMENT AND CONTROL FUNCTIONS
3-3
3
EAU03953
Speedometer unit
The speedometer unit is equipped with
the following:
●
an odometer
● two tripmeters
When set to “ODO”, the motorcycle’s
total mileage is indicated.
When set to “TRIP 1” or “TRIP 2”, the
motorcycle’s mileage since the tripme-
ter was last reset is indicated. Use the
tripmeters to estimate how far you can
ride on a tank of fuel. This information
will enable you to plan fuel stops in the
future.
To set a mode
Push the “SELECT” button to change
between the odometer mode “ODO”,
and the tripmeter modes “TRIP 1” and
“TRIP 2” in the following order:
ODO
→
TRIP 1
→
TRIP 2
→
ODO
To reset a meter
To reset either tripmeter 1 or 2 to 0.0,
select either by pushing the “SELECT”
button, and then push the “RESET”
button for at least one second.
EAU03954
Tachometer unit
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
EC000003
CAUTION:
_
Do not operate the engine in the ta-
chometer red zone.
Red zone: 11,500 r/min and above
_
This tachometer unit is equipped with a
clock.
1. Speedometer
2. Odometer/tripmeter
3. “SELECT” button
4. “RESET” button 1. Tachometer
2. Tachometer red zone
3. Clock
U5LV10.book Page 3 Wednesday, October 23, 2002 2:45 PM