Yamaha FS1R, Руководство пользователя

Страница: 28 / 88

28
General Editing Procedure
The EDIT [PERFORMANCE], [EFFECT], or [VOICE] mode can be accessed from the PLAY mode as follows:
1.
Select an Edit Mode
Press the EDIT button corresponding to the type of parameters you want to edit: [PERFORMANCE], [EFFECT],
or [VOICE]. See the FS1R Parameter Groups chart, below.
2.
Select a Parameter Group
Use the CURSOR [ ] and [ ] buttons or Knob 2 (when both Knob Mode buttons are disengaged) to select
the desired parameter group if necessary (the parameter groups and corresponding manual page numbers are
listed in the chart below). The triangular pointer to the left of the selected group name will be highlighted
(solid).
FS1R Parameter Groups
Edit Mode Group Sub-Group Page
PERFORMANCE • COMMON • CtrlSrc 30
• CtrlDst 31
• Fseq 32
• Others 35
• PART • Tone 37
• EG 39
• Pitch 40
• Others 41
• STORE 44
• RECALL 44
EFFECT • Rev 45
• Var 46
• Ins 47
• EQ 48
VOICE • COMMON • LFO1 51
• LFO2 52
• Filter 53
• PitchEG 57
• Others 58
• OPERATOR • Osc 62
• EG 66
• FrqEG 67
• Sns 68
• STORE 70
• RECALL 70
3.
Press [ENTER] and Select a Sub Group
Press the [ENTER] button to go to the selected parameter group. Unless you are in the EDIT [EFFECT] mode or
accessing the STORE or RECALL functions, you will also need to select a Sub Group in the same way as in the
previous step: use the CURSOR [
] and [ ] buttons or Knob 2 (when both Knob Mode buttons are
disengaged) to select the desired sub-group if necessary. The triangular pointer to the left of the selected sub-
group name will be highlighted (solid).
4.
Press [ENTER]
Press [ENTER] to go to the selected Sub Group (not necessary if you are in the EDIT [EFFECT] mode or
accessing the STORE or RECALL function).
EDITING
2/FS1R/EDIT/E.qx 10/19/98 7:22 PM Page 28