24
VarRtn (Variation Return)
❑
Settings: 000 … 127
Adjusts the level of the signal returned from the FS1R variation effect stage. The higher the value, the higher the
level of the variation signal.
PfmNSft (Performance Note Shift)
❑
Settings: -24 … 0 … +24
Transposes the pitch of the performance setup down or up in semitone steps over a ±2 octave range. “0”
corresponds to standard pitch. Each increment corresponds to a semitone. A setting of “-12”, for example,
transposes the pitch down one octave.
The PART ASSIGN Mode
The PART ASSIGN mode is primarily intended to be used to assign voices to the performance parts, and to set the
individual MIDI receive channel, volume, pan, effect send levels, and other parameters for the corresponding part.
The PART ASSIGN mode can, however, also be used to play individual voices.
The PART ASSIGN mode can be selected from the PERFORMANCE PLAY mode by pressing either the PART [
] or
[
] button. The PART ASSIGN display looks like this:
n
The voice edit mark will appear when any voice edit operation is performed.
n
When the Insertion Effect Switch is on, REV refers to "Send Insertion to Reverb", and VAR refers to "Send Insertion to Variation". See page 13
for effect system details.
In the PART ASSIGN mode the controller knobs can be used to directly edit the selected parameter when both knob
mode buttons are disengaged: the knobs adjust the values of the corresponding parts on the display, from left to
right. When both Knob Mode buttons are disengaged, however, parameters of 4 parts appear at a time, like this:
Part1
Part2
Part3
Part4
Part1 Part2 Part3 Part4
Channel
Bank
Program Number
Volume
Pan
Reverb
Send
Insertion
Effect
Switch
Variation
Send
Filter
Note Shift
Voice (part) Edit Mark
1/FS1R/OM/E.qx 10/19/98 6:28 PM Page 24
