Maintenance
90
have the proper skills, tools, or supplies
to perform a maintenance procedure,
have a Yamaha dealer or other qualified
mechanic do the work.
The procedures involve disassembling
the motor and exposing dangerous parts.
To reduce the risk of injury from moving,
hot, or electrical parts:
●
Turn off the engine and keep the key(s)
and engine shut-off cord (lanyard) with
you when you perform maintenance un-
less otherwise specified.
●
The power trim and tilt switches oper-
ate even when the ignition key is off.
Keep people away from the switches
whenever working around the motor.
When the motor is tilted, keep away
from the area under it or between it and
the clamp bracket. Be sure no one is in
this area before operating the power
trim and tilt mechanism.
●
Allow the engine to cool before han-
dling hot parts or fluids.
●
Always completely reassemble the mo-
tor before operation.
EMU28511
Replacement parts
If replacement parts are necessary, use only
genuine Yamaha parts or parts of equivalent
design and quality. Any part of inferior quality
may malfunction, and the resulting loss of
control could endanger the operator and
passengers. Yamaha genuine parts and ac-
cessories are available from your Yamaha
dealer.
EMU34151
Severe operating conditions
Severe operating conditions involve one or
more of the following types of operation on a
regular basis:
●
Operating continuously at or near maxi-
mum engine speed (rpm) for many hours
●
Operating continuously at a low engine
speed (rpm) for many hours
●
Operating without sufficient time for engine
to warm up and cool down
●
Frequent quick acceleration and decelera-
tion
●
Frequent shifting
●
Frequently starting and stopping the en-
gine(s)
●
Operation that fluctuates often between
light and heavy cargo loads
Outboard motors operating under any of
these above conditions require more fre-
quent maintenance. Yamaha recommends
that you do this service twice as often as
specified in the maintenance chart. For ex-
ample, if a particular service should be done
at 50 hours, do it instead at 25 hours. This
will help prevent more rapid deterioration of
engine components.
6AW-9-77-1E0.book 90 ページ ２０１０年３月１６日 火曜日 午後６時８分
