Operation
63
could tear loose. Do not route the cord
where it could become entangled, pre-
venting it from functioning.
●
Avoid accidentally pulling the cord dur-
ing normal operation. Loss of engine
power means the loss of most steering
control. Also, without engine power,
the boat could slow rapidly. This could
cause people and objects in the boat to
be thrown forward.
1. If equipped with the Yamaha Security
System: If the lock mode of the Yamaha
Security System is selected, use the re-
mote control transmitter to select the un-
lock mode. Short beep will sound twice
when unlocking the Yamaha Security
System. For further information, see
page 24.
2. Turn the main switch of the main station
to “
” (on) to make sure that the digital
electronic control-active indicator lights.
The engine can not be started when the
digital electronic control-alert indicator
lights.
3. Place the control lever in “ ” (neutral).
4. Push the station selector switch of the
sub station. Station change is only pos-
sible when all control levers have been
set to “ ” (neutral). Make sure that the
digital electronic control-active indicator
of the sub station lights.
TIP:
The main station can still start and stop the
engine. However, it cannot operate the digi-
tal electronic control.
5. Attach the engine shut-off cord to a se-
cure place on your clothing, or your arm
or leg. Then install the clip on the other
end of the cord into the engine shut-off
switch.
6. Press the Start/Stop button to start the
engine. The indicator for the starting en-
gine will come on.
NOTICE:
Do not
keep the starter motor turning for
more than 5 seconds. If the starter
motor is turned continuously for
more than 5 seconds, the battery will
be quickly discharged, thus making it
impossible to start the engine. The
starter can also be damaged. If the
engine will not start after 5 seconds
of cranking, release the Start/Stop
button, wait 10 seconds, then crank
the engine again.
[ECM02490]
ZMU07141
ZMU07322
6AW-9-77-1E0.book 63 ページ ２０１０年３月１６日 火曜日 午後６時８分
