manualshive.com logo in svg

Yamaha FL350A, Руководство пользователя

Поделиться
Скачать
Yamaha FL350A Скачать руководство пользователя страница 56

Engine control system

49

●

The buzzer will sound in the same way as
during an overheating alert.

If the alert device has activated, stop the en-
gine as soon as it is safe to do so. Check the
oil level and add oil as needed. If the oil level
is correct and the alert device does not
switch off, consult your Yamaha dealer.
Multiple engine drive users:
If the low oil pressure alert system of one en-
gine activates, all of the engines will slow
down and the buzzer will sound. To switch
off the alert activation on the engine(s) not
affected by low oil pressure, turn off the main
switch of the engine with the low oil pressure.

EMU42150

Water separator alert

The outboard motor is equipped with a water
separator alert system. If water separated
from the fuel exceeds a specific volume, the
alert system will activate.

●

The water separator-alert indicator of the
6Y8 Multifunction Tachometer will come
on or blink.

●

The pop-up window will appear on the
Multi-Display.

●

The buzzer will sound intermittently when
the control lever is in the neutral position.

If the alert system has activated, stop the en-
gine and see page 110 of this manual to
drain the water from the fuel filter. Get back
to the port soon and consult a Yamaha deal-
er immediately.

NOTICE

ECM02470

Although the buzzer will stop when the
engine is started and the control lever is
moved to the forward or reverse position,
do not use the outboard motor. Other-
wise, serious engine damage could oc-
cur.

ZMU07240

ZMU05423

ZMU07242

6AW-9-77-1E0.book  49 ページ  ２０１０年３月１６日　火曜日　午後６時８分

Содержание FL350A



























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды