Yamaha FJR1300A(D), Руководство по обслуживанию

Страница: 53 / 662

FEATURES
1-44
Setting the clock
1. Use the select switch to highlight “Clock”.
2. Push the menu switch “MENU”.
3. When the hour digits start flashing, use the
select switch to set the hours.
4. Push the menu switch “MENU”, and the
minute digits start flashing.
5. Use the select switch to set the minutes.
6. Push the menu switch “MENU” to return to
the setting mode menu.
Resetting all of the display items
1. Use the select switch to highlight “All Reset”.
2. Push the menu switch “MENU”.
3. Use the select switch to highlight “YES”, and
then push the menu switch “MENU”.
TIP
The odometer and the clock cannot be reset.
Self-diagnosis device
This model is equipped with a self-diagnosis de-
vice for various electrical circuits. If a problem is
detected in any of those circuits, the engine trou-
ble warning light will come on and the informa-
tion display will indicate a fault code.
If the information display indicates any fault
codes, note the code number, and then check
the fuel injection system. (Refer to “FUEL IN-
JECTION SYSTEM” on page 8-33.)
The self-diagnosis device also detects problems
in the immobilizer system circuits.
If a problem is detected in the immobilizer sys-
tem circuits, the immobilizer system indicator
light will flash and the information display will in-
dicate a fault code when the main switch is
turned to “ON”.
TIP
If the information display indicates fault code 52,
this could be caused by transponder interfer-
ence. If this error appears, try the following.
MENU
Grip Warmer
Maintenance
Time Trip
Unit
Display
Brightness
Clock
Clock
5 55
MENU
Maintenance
Time Trip
Unit
Display
Brightness
Clock
All Reset
1. Immobilizer system indicator light “ ”
2. Engine trouble warning light “ ”
3. Fault code display
All Reset
YES
NO
GEAR
N
25
A.TEMP ˚C
Lo
C.TEMP ˚C
0:06
TIME TRIP
1 2 3