Trouble Recovery
92
careful not to twist the water detec-
tion switch lead when screwing the fil-
ter cup onto the filter housing.
[ECM01971]
7.
Connect the water detection switch cou-
pler securely until a click is heard.
8.
Install the top cowling.
9.
Turn the main switch to the “
” (on) po-
sition and check that the water separa-
tor-alert indicator remains off and the
buzzer does not sound. If the water sep-
arator-alert indicator blinks or the buzzer
sounds, have your Yamaha dealer check
the outboard motor.
NOTICE:
Although
the buzzer will stop when the engine is
started and the control lever is moved
to the forward or reverse position, do
not use the outboard motor. Other-
wise, serious engine damage could
occur.
[ECM02481]
EMU33502
Treatment of submerged motor
If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immedi-
ately.
NOTICE:
Do not attempt to run the
outboard motor until it has been com-
pletely inspected.
[ECM00402]
1. O-ring
2. Filter cup
3. Water detection switch lead
2
3
1
ZMU07791
U6DV75E0.book Page 92 Tuesday, February 21, 2017 8:33 AM
