Instruments and indicators
36
To return to the normal display
Push the “SET” (set) button, and the low oil
pressure-alert indicator will start to blink.
Stop the engine immediately if the buzzer
sounds and the low oil pressure-alert device
is activated. Check the engine oil level and re-
plenish oil if necessary. If the alert device has
activated while the appropriate engine oil lev-
el is maintained, consult your Yamaha dealer.
NOTICE
ECM01602
Do not continue to run the engine if the
low oil pressure alert device has activated.
Serious engine damage will occur.
Overheat alert
If the engine temperature rises too high while
cruising, the pop -up window will appear.
The engine speed will automatically decrease
to about 2000–3500 r/min.
To return to the normal display
Push the “SET” (set) button, and the over-
heat-alert indicator will start to blink.
Stop the engine immediately if the buzzer
sounds and the overheat device has activat-
ed. Check the cooling water inlet for clog-
ging.
NOTICE
ECM01594
Do not continue to run the engine if the
overheat-alert indicator blinks. Serious
engine damage will occur.
Do not continue to operate the engine if
an alert device has activated. Consult
your Yamaha dealer if the problem can-
not be located and corrected.
1. Pop-up window
1. Low oil pressure-alert indicator
1
ZMU08330
1
ZMU08335
1. Pop-up window
1. Overheat-alert indicator
1
ZMU08331
1
ZMU08336
U6DV75E0.book Page 36 Tuesday, February 21, 2017 8:33 AM
