Yamaha EMX62M, Руководство пользователя

Страница: 16 / 26

14
Front & Rear Panels
EMX62M—Owner’s Manual
Rear Panel
1
SPEAKERS 1 & 2 jacks
The SPEAKER 1 & 2 phone jacks output the
main signal from the internal power amplifier
and are used to connect speakers. They are inter-
nally connected in parallel and output the same
signal.
B
AC IN socket
Connect the included power cord to this socket.
Connect the plug of the power cord to an AC out-
let that meets the requirements stated in the spec-
ifications in this document.
Installation
The EMX62M uses a forced cooling system with
intake on the bottom of the rear panel and
exhaust on the top of the rear panel to avoid
blocking the heated air flow.
1 2
Note: The total impedance of the connected
speaker system must be between 4 and 8 ohms.
This means that you can connect one speaker
system with an impedance of between 4 and 8
ohms to one SPEAKER jack, or two speaker sys-
tems each with an impedance of between 8 and
16 ohms to each SPEAKER jack. Do not connect
anything other than speakers to these jacks.
Connecting
one speaker
Connecting
two speakers
4
Ω
–8
Ω
8
Ω
–16
Ω
8
Ω
–16
Ω
NO
NO
Front
Front
15cm
or less
Exhaust
Intake