background image

 

Contents

 

5

 

EMX62M—Owner’s Manual

 

Introduction

 

Thank you for purchasing the Yamaha EMX62M Powered Mixer. In order to take full 
advantage of the EMX62M and enjoy long and trouble-free operation, read this owner’s 
manual carefully, and keep it in a safe place for future reference.

 

Features

 

• The EMX62M’s six input channels support a 

wide range of audio sources, including micro-
phones, instruments, and line-level devices. 
Input channels 1 through 4 feature low- and 
hi-impedance balanced inputs, with +15 V phan-
tom power for use with condenser-type micro-
phones on the low inputs, input channel 5 
features two line-level inputs, while input chan-
nel 6 features two hi-impedance inputs for con-
necting instruments such as electric-acoustic 
guitar and electric bass directly.

• The built-in power amplifier offers a maximum 

output of 200 W with a 4

 

 

 speaker system, 

135 W with an 8

 

 

 speaker system, and a limiter 

circuit prevents sounds distortion and speaker 
damage.

• The 7-band graphic equalizer on the main output 

allows you to tailor the sound for each particular 
venue and reduce the risk of feedback by attenu-
ating troublesome frequencies.

• Also built-in is a digital effects processor, offering 

three different programs for adding reverbera-
tion or ambiance to vocal or instrument sounds, 
and remote on/off control using an optional 
footswitch.

• External effects can be patched into the system 

via the EFFECT OUT and AUX IN jacks, with 
effects return level control.

• Separate outputs are provided for connecting 

powered monitor speakers, headphones, or a ste-
reo recorder (cassette, DAT, or MD). 

• The EMX62M has implemented “EEEngine”, 

Yamaha’s epochal amp drive technology to create 
an unrivaled high-efficiency drive.
The EEEngine’s energy-saver/low-heat-genera-
tion design has reduced power consumption to 
50% or less, and reduced heat generation to 35% 
or less (in field applications, compared to 
Yamaha’s previous models), and has lead to a 
reduction in energy cost and to less-restrictive 
installation requirements related to heat genera-
tion.

 

Contents

 

Introduction ........................................................... 5

Features ............................................................... 5

EMX62M Quick Guide ................................................ 6

Front & Rear Panels ................................................... 9

Control Panel .......................................................  9
Input/Output Panel..............................................  12
Rear Panel..........................................................  14

Installation .......................................................... 14
Hookup Example ................................................  15

Basic Operation ........................................................ 16

Connecting Sources  ........................................... 16

Monitoring ........................................................... 16

Using the Built-in Effects  .................................... 16

Installing an optional rack mount kit  ......................... 17

Troubleshooting ....................................................... 18

Specifications ........................................................... 19

General Specifications ........................................ 19

Output Specifications .......................................... 20

Dimensions ......................................................... 20

Block & Level Diagrams  ..................................... 21

Содержание EMX62M



























Отзывы: