Yamaha EMX62M, Руководство пользователя

Страница: 8 / 26

6
EMX62M Quick Guide
EMX62M—Owner’s Manual
EMX62M Quick Guide
The following steps (1-5) explain the basic con-
nection and operation of the EMX62M.
Also, please read “Front and Rear Panel” and
“Basic Operation” following this Quick Guide
section to learn more about using the EMX62M.
Connection
Connecting speakers
Using speaker cables, connect each speaker to the
SPEAKERS 1 and 2 jack on the rear panel of the
EMX62M.
• The EMX62M is a monaural mixer. The same signal
will be output from all SPEAKERS jacks on the rear
panel. You do not need to differentiate right from
left speakers.
• You may connect to either of the two jacks on the
speakers.
• Be sure to use a cable designed for speaker connec-
tion.
Never connect the speakers in the manner shown
below. Otherwise, the EMX62M’s built-in power
amplifier will be damaged.
Connecting a microphone
Make sure that the power is turned off to the
EMX62M.
Connect a microphone to the Low-Z jack of
channel 1-4.
Using a condenser microphone
Turn on the PHANTOM switch (located in the
upper right corner on the panel).
• Do not connect or disconnect a condenser micro-
phone while the power to the unit is on and the
PHANTOM switch has been turned on.
Connecting a CD player, MD player, and/or cassette
deck
Connect a CD player or MD player to the 2TR IN
jacks. Refer to the operation manual of the corre-
sponding device for more information on the
input and output of the device.
STEP 1
EMX62M
EMX62M
EMX62M
Microphone
EMX62M
PHANTOM switch
EMX62M
Recorder
(Cassette, DAT, MD)
CD player