– 22 –
13. Install the washers into wheel axle.
14. Insert cotter pins into wheel axle frame, and then
bend as shown in the illustration.
h
Wheel
j
Washer
k
Cotter pin
j
h
k
k
;
z
l
z
l
h
j
k
15. Fasten the wheel axle frame to the generator
frame with the bolts and nuts. Make sure that the
wheel axle frame is on the right side of the control
panel.
l
Bolt (8 × 16 mm Flange bolt)
;
Wheel axle frame
z
Nut (8 mm Flange nut)
Tightening torque:
16 N·m (1.6 kgf·m, 12 lb·ft)
TIP
Refer to the illustration and confirm the position of the
wheel kit.
7P5-F8199-14.indd 22
2021/06/23 11:22:15