Yamaha DTXPRESS III, Руководство пользователя

Страница: 13 / 216

13
If “
HH contrler
” is set for the pad type, the value set here will
be transmitted as the velocity.
The trigger input level will be displayed as a % in the upper right
hand corner of the display. The maximum velocity (input level
99%) will be 127. The level is low when the pad is hit the weakest
so a wider dynamic range will be possible.
* This value will be automatically set after the appropriate pad
type is set in [1-1. Pad Type]. Some fine-tuning of the value will
be necessary.
1-5. Specific Rejection
This function prevents cross talk from occurring between two speci-
fied input jacks
q
and
e
.
q
TRIG IN (Trigger Input Number)
Assigns the trigger input jack number (the same procedure as in
[1-1. Pad Type]).
w
VelCurve (Velocity Curve)
Sets the Input Velocity Curve for the trigger input jack assigned in
TRIG IN
q
.
1-4. Self Rejection, Rejection
This function is used to prevent double triggers * and cross talk
(mixed input signals between the jacks) for each input jack
q
.
* double trigger: When 2 sounds are played at the same time.
q
TRIG IN (Trigger Input Number)
Assigns the trigger input jack number (the same procedure as in
[1-1. Pad Type]).
w
SelfRej (Self Rejection)
[Range] 0-9
Prevents double triggers from occuring in the input jack assigned
in TRIG IN
q
. After an event is detected, further events will be
automatically muted for a certain length of time. Larger values set
longer times.
q
TRIG IN (Trigger Input Number)
Assigns the trigger input jack number (the same procedure as in
[1-1. Pad Type]).
w
SPCRej (Specific Rejection)
[Range] 0-9
After an event occurs from the pad from the input jack assigned in
e
, the pad of the input jack assigned in TRIG IN
q
will not
sound for a certain length of time unless the level is greater than
the value assigned here.
e
frm (Assigned Destination Trigger Input Number)
[Range] 1-10, 6&7
Sets the destination trigger input jack number of the pad that will
be rejected. When “
6&7
” is selected, both trigger inputs 6 and 7
will be assigned.
TRIG IN= 1
VelCurve= normal w
q
TRIG IN= 1
SelfRej=2 Rej= 3
w e
q
TRIG IN= 1
SPCRej=0 frm= 1
q
e
Trigger Setup Edit Mode
normal
hard 2 hard 1 loud1 loud 2
w
Strength
of hit
m
V
elocity
m
e
Rej (Rejection)
[Range] 0-9
Prevents cross talk from occuring in the input jack assigned in
TRIG IN
q
. Events triggered by other pads (input jacks) that are
of a lower input value than what is set here will not be delivered
for a set length of time.
1-3. Velocity Curve
This function sets the MIDI Velocity Curve for the sensitivity for
each input jack
q
.