Yamaha Disklavier, Руководство по эксплуатации

Страница: 91 / 101

79
English Chapter 20: Display Er
ror Messages
Chapter 20
Display Error Messages
While operating your Disklavier, an error message may appear in the display. If an error message appears,
refer to the table below for an explanation of the message.
Note:
This table does not explain every error message.
The current function cannot be executed because
protected files exist on the floppy disk.
No more song data can be copied to the selected disk
because the disk is full.
Use another disk.
The current function cannot be performed because the
floppy disk’s erasure protection tab is set to “protected.”
Set the disk’s erasure protection tab to “unprotected.”
☛
See “Floppy Disk Accidental Erasure Protection” on
page 61.
No more song data can be copied onto the disk because
the disk is nearly full.
The current function cannot be performed because this
disk contains no songs or only one song.
A wrong floppy disk has been inserted as the destination
disk. Insert the correct floppy disk.
The disk is either new and has not yet been formatted for
use with the Disklavier or uses a format not recognized
by the Disklavier. Format the disk.
☛
See “Formatting Disks” on page 61.
In order to be copied, the destination disk must be the
same format as the floppy disk.
Only E-SEQ files can be copied onto an E-SEQ type
disk.
The disk may be damaged.
Press the Stop key to clear the message.
If this message appears frequently with other disks as
well, contact your nearest Yamaha service representative.