Yamaha Disklavier, Руководство по эксплуатации

Страница: 46 / 101

34
Operating the Pedals
Yourself
During playback, the Disklavier pedals play the
pedal data that was recorded with the song. If,
however, you want to practice your pedal playing,
you can cancel pedal playback and play them
yourself.
The Pedal Cancel function is set in the Control
Unit.
1
Hold down [PART L] and [PART R]
until “PDoff” appears on the
display.
You can now play the pedals yourself.
“PDoff” remains on the display until the
pedals are turned on again.
2
To turn the pedals back on, hold
down [PART L] and [PART R] until
“PD on” appears on the display.
“PD on” flashes on the display for a few
seconds, then goes off.
The pedals now play as normal.
Note:
You cannot play the keyboard when the
Silent system is engaged.
Using the Built-in
Metronome
You can sound the built-in metronome to practice
playing songs on the Disklavier.
With each beat of the metronome a digital click is
produced by the Control Unit. The click can be
turned off. In addition to the click, the LED
volume indicators function as a visual
metronome. On the first beat of each measure, all
the indicators flash. On the remaining beats, the
left half and right half of the indicators flash
alternately.
All metronome parameters are reset when a disk
is ejected or when the Disklavier is turned off.
1
Press [METRONOME].
The METRONOME indicator lights, the
metronome starts, and the following display
appears.
The
c
symbol is used to show the currently
selected parameter. It is moved by pressing
[
<
] and [
>
].
1st beat
2nd beat
3rd beat
PART
L R
PART
L R
–10 –8 –6 –4 –2 0
METRO-
NOME
1 3
2