Yamaha CS-R10 Скачать руководство пользователя | Manualshive

Страница: 9 / 56

background image

RIVAGE PM10 System Setup Guide

9

About utility software

The RIVAGE PM10 system can be used with a variety of
utility software.

• RIVAGE PM10 Editor

This Windows application software enables you to
access the same functions that are available on the
control surface. You can use your computer to perform
off-line editing by preparing the RIVAGE PM10
system settings in advance, and to monitor and adjust
those settings (on-line monitoring/operation).
A computer with RIVAGE PM10 Editor installed can
be connected to a DSP engine or a control surface.
If the computer is connected to the DSP engine you
can control the entire system without using the control
surface. If the control surface malfunctions, you will
still be able to operate the system using your computer.

Information on this software application is available on
the Yamaha Pro Audio website:

http://www.yamahaproaudio.com/

Information on downloading, installing, and setting up
RIVAGE PM10 Editor is available in the Installation
Guide that is posted on the website.

Firmware updates

You can update the unit firmware to improve operations,
add functions, and correct possible malfunctions.
Details on updating the firmware are available on the
following Yamaha Pro Audio website:

http://www.yamahaproaudio.com/

For information on updating and setting up the unit,
please refer to the firmware update guide available on the
website.

Conventions in this manual

In this manual, switch-type controllers on the panel are
called “keys.” Control knobs on the panel are called
“knobs.” Some knobs rotate from a minimum value to a
maximum value, while others rotate endlessly.
Virtual buttons displayed on the screen are called
“buttons,” and virtual knobs are called “knobs.”
Controls located on the panel are enclosed in square
brackets [ ] (e.g., [CUE] key) to distinguish them from
virtual buttons and knobs displayed on screen. For certain
controls, the name of the section appears before the
brackets (e.g., Selected Channel [ISOLATE] key).

Accessories
(CS-R10, CS-R10-S)

• AC Power Cords (×2)
• Dust cover
• Gooseneck Lamps LA1L

(×4 for CS-R10 , ×3 for CS-R10-S)

• System Setup Guide (this book)

«
...
7
8
9
10
11
...
»

Содержание CS-R10

























































Отзывы:

Нет отзывов

Похожие инструкции для CS-R10

The Karman Line

Бренд: Hungry Robot Pedals Страницы: 3

BON APPETIT BONMIX

Бренд: Optimum Страницы: 23

Бренд: Canford Страницы: 9

Бренд: ARESA Страницы: 14

Бренд: IK Multimedia Страницы: 32

Бренд: G-Lab Страницы: 8

DELUXE MIXMASTER 2366

Бренд: Sunbeam Страницы: 56

Epic Polar Boost

Бренд: Lithium Grim Страницы: 13

Бренд: Alto Страницы: 14

Soundcraft Si impact

Бренд: Harman Страницы: 132

Бренд: Hamilton Beach Страницы: 24

Бренд: Draper Страницы: 16

Бренд: Draper Страницы: 20

Бренд: DAPAudio Страницы: 24

Бренд: DAPAudio Страницы: 19

Бренд: Yamaha Страницы: 82

Бренд: Yamaha Страницы: 100

Бренд: The t.mix Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды