47
CVP-202
■
Changing the Effect Type
..........................................................................
You can change the effect type selection in the EFFECT page. Select
an effect type using the
TYPE
▲
and
▼
buttons, or highlight the
TYPE
function and use the data dial or the
[–]
and
[+]
buttons.
Effect Type
• Settings: See table on page 164.
• Basic setting: Depends on voice.
To reset the effect type to its basic setting, simultaneously press the
EFFECT TYPE
▲
and
▼
buttons or the
[–]
and
[+]
buttons.
➔
The selected effect type is highlighted.
Because the basic setting of the effect type depends on the voice, the
effect type may change automatically when you select a different voice.
• The effect type selection affects all
keyboard parts. Different settings
cannot be made for each part.
• When the basic setting of the [EF-
FECT] button is ON for two or three
voices selected in Dual and/or Split
mode, the Clavinova will automatically
select the most appropriate effect type
and set the effect depth (page 48) for
each part to an appropriate level.
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
effect type is selected.
• If both the [EFFECT] and [REVERB]
buttons are turned on, both effects will
be applied.
Voice Effects
X
Use the PAGE [
<
] and [
>
] buttons to switch between the EF-
FECT and EFFECT DEPTH pages.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
➔
The value displayed by the
VARIATION
function switches between
OFF
and
ON
, and the effect changes.
The way in which the effect changes depends on the effect type (see
the table on page 164). Also, because the basic setting of the
VARIA-
TION
function depends on the voice, the setting of this function may
change automatically when you select a different voice.
■
Varying the Effect
.............................................................................................
Each of the Clavinova’s effect types has a variation that can be se-
lected using the
VARIATION
function in the EFFECT page. To vary the
effect produced by the selected effect type, press the LCD button under
VARIATION
.
VARIATION function
• Settings: OFF, ON
• Basic setting: Depends on voice.
45
