Yamaha Clavinova CVP-105, Руководство по обслуживанию

Страница: 17 / 93

CVP-105
17
1 D2 I/O Data Bus 17 TXRDY O character data
2 D3 I/O Data Bus 18 SYNDET/BD I/O character data
3 RXD I Serial Data 19 /CTS I
input terminal for modem interface
4 NC 20 NC
5 GND Ground 21 TXEMPTY O character data
6 D4 I/O Data Bus 22 TXD O character data
7 D5 I/O Data Bus 23 CLK I Clock
8 D6 I/O Data Bus 24 RESET I Reset
9 D7 I/O Data Bus 25 /DSR I
input port for modem interface
port for modem interface
10 /TXC I Clock 26 /RTS O
output
port for modem interface output 11 /WR I Write signal 27 /DTR O
12 /CS I Device select 28 /RXC I Clock
13 NC 29 NC
14 C//D I Access select signal 30 VCC I Power supply
15 /RD I Read signal 31 D0 I/O Data Bus
16 RXRDY O character data 32 D1 I/O Data Bus
MSM82C51A-2GS-K (XV513A00)
USART (Universal Synchronous Asynchronous receiver Transmitter)
PIN
NO.
NAME I/O FUNCTION
PIN
NO.
NAME I/O FUNCTION
DM : IC400
1 LRCK I 15 Vcc1 - Analog power supply (+5 V)
2 DATA I Data input 16 VOUTL O Lch, analog voltage output
3 BCK I Bit clock 17 NC -
4 CLKO O Clock input 18 EXTL O Lch, analog output
5 XTI I Clock input 19 AGND2L - Analog ground
6 XTO O Clock out 20 Vcc2L - Analog power supply (+5 V)
7 DGND - Digital ground 21 /ZERO O Zero data flag
8 VDD - Digital power supply (+5 V) 22 /RST I Reset
9 Vcc2R - Analog power supply (+5 V) 23 /CS/IWO I Chip select
10 AGND2R - Analog ground 24 MODE I Mode control select
(H: Software, L: Hardware)
11 EXTR O Rch, analog output 25 /MUTE I Mute control
12 NC - 26 MD/DM0 I Mode control data/De-emphasis select1
Mode control BCK/De-emphasis select2
Mode control Latch/input format select
13 VOUTR O Rch, analog voltage output 27 MC/DM1 I
14 AGND1 - Analog ground 28 ML/IIS I
PCM1716E (XU829A00) DAC (Digital to Analog Converter)
PIN
NO.
NAME
I/O
FUNCTION
PIN
NO.
NAME I/O FUNCTION
DM : IC800