CVP-105
32
Write edited data?
This confirmation message appears if you attempt to exit the Initial Edit function without writing the data to disk.
Press
YES
to save the edited data. Press
NO
to exit without saving. Press
CANCEL
to return to the Initial Edit display without
saving.
Save panel settings to disk?
This confirmation prompt appears when you execute the Setup Memory function to save the current panel settings with the song being edited in
Song Record mode.
Select
YES
to save the panel settings. Press
CANCEL
to return to the
RECORD EDIT 2
display without saving.
Other Record Edit
Number of disk exchanges:
This message informs you of the number of times the disks must be exchanged when copying a song to a different disk before starting the song
copy operation.
Insert disk 2 (destination disk). (##/##)
Insert the destination disk to be copied.
Destination disk isn't same type (2DD/2HD) as source!
This message appears when you try to copy data from a 2DD disk to a 2HD disk — or vice versa — using the Disk Copy function.
Press
OK
to cancel the copy operation, then perform the operation again from the beginning. Make sure the destination disk you
insert is the same type (2DD or 2HD) as the source disk being copied.
Can't copy to source disk!
This message appears if you insert the source disk when prompted to insert the destination disk while using the Disk Copy function to copy data
from one disk to another.
Press
OK
to cancel the copy operation, then execute the Disk Copy function again from the beginning. When exchanging disks
during the copy operation, be careful not to confuse the source and destination disks.
Select destination song number.
When copying a song from the source disk to another disk, this message prompts you to specify the song number in the destination disk to
which the song is to be copied, when the disk is first inserted.
Insert disk 1 (source disk). (##/##)
This message prompts you to insert the source disk when copying songs to a second disk.
Incorrect Disk!
This message is displayed if you insert a disk other than the specified disk (source or destination) when prompted to exchange disks while using
the Disk Copy function to copy data from one disk to another.
Press
OK
to cancel the copy operation, then execute the Disk Copy function again from the beginning. When exchanging disks
during the copy operation, be careful to insert the correct disk as specified.
Select a different song number!
This message indicates that you have selected the same song number as both the source and the destination when copying a song within a disk.
Change the destination song number.
Song Copy & Disk Copy