(Fig. 3)
[CN002]
[A] x 3
[CN001]
[56A] x 6
JACK
DM
EQ
NW1
[59] x 4
[58B] x 2
[58A] x 2
[11] x 4
JACK assembly
[56B] x 7
MA60 assembly
MA cover
[12C] x 2
[12B] x 2
U.S. model only
Power transformer
FU60 assembly
[12A] x 2
FU shield cover
DISASSEMBLY PROCEDURE
CVP-105
8
1
Top Board Assembly
1-1
Disconnect the PK cable. (Fig. 2)
1-2
Disconnect the AC cord.
1-3
Remove the three (3) screws marked [50]. The top
board can then be removed by sliding and lifting up.
(Fig. 1)
2
Circuit Boards and Units on the Keybed
Remove the following screws, each circuit board
and unit can then be removed. (Fig. 2, 3)
*1
Before removing the JACK circuit board, removed the EQ circuit board and the PK cable.
Top board assembly
(Fig. 1)
[50]: Truss Head Screw 4.0 x 8 MFZN2BL (VB934000)
[50]
Back Top Board
[50]
[50]
(Fig. 2)
Back Top Board
PK cable
[56C]
Key cover assembly
Key cover assembly
(Fig. 4)
[56]
Rack cover
[56]: Bind Head Tapping Screw-B 3.0 x 8 MFZNBL (EP600190)
DM
EQ
JACK *1
NW
FU 60 Ass'y
Power Trans.
MA60 Ass'y
Circuit Board and Unit
6
3
7
3
4
2
4
2
QTY
[56A]
[A]
[56B]
[56C]
[59]
[12A]
[12B]
[58]
Ref. No.
3
Key Cover Assembly
3-1
Remove the top board assembly. (See Procedure 1.)
3-2
Remove the screw marked [56]. The rack cover can
then be removed. (Fig. 4)
3-3
Set either end of the rod at the openings guide and
then lift the key cover assembly. (Fig. 4)
Bind Head Tapping Screw-B 3.0 x 8 MFZN2BL
(EP600190)
Support, PCB
(VT967700)
Bind Head Tapping Screw-B 3.0 x 8 MFZN2BL
(EP600190)
Bind Head Tapping Screw-B 3.0 x 8 MFZN2BL
(EP600190)
Bind Head Tapping Screw-1 3.0 x 20 MFZN2Y
(EP030340)
Bind Head Tapping Screw-1 3.0 x 8 MFZN2Y
(EP600280)
Bind Head Tapping Screw-1 3.5 x 12 MFZN2BL
(EP030340)
Bind Head Tapping Screw-B 3.5 x 12 MFZN2BL
(EP030340)
Screw
4
FDD Assembly
4-1
Remove the top board assembly. (See Procedure 1.)
4-2
Remove the key cover assembly. (See Procedure 3.)
4-3
Remove the screws marked [50B] and [52], there
are two of each. The FDD assembly can then be
removed. (Fig. 5)
4-4
Remove the four (4) screws marked [40]. The
floppy disk drive unit can then be removed. (Fig. 5)
(Fig. 5)
[40]: Bind Head Screw 3.0 x 5 MFZN2Y (EG330150)
[50]: Bind Head Screw-1 4.0 x 10 MFZNBL (VA221600)
[52]: PW Head Tapping Screw-1 3.5 x 18-10 MFZN2Y (VZ057000)
FDD Assembly
[40] x 4
[50B] x 2
[52]
[52]
[40] x 4