Yamaha 2007 XP500, Руководство по обслуживанию, Страница: 124 / 450

ENGINE
3-20
6. Drain:
●
Coolant
(from the engine and radiator)
7. Check:
●
Rubber washer “ 1 ”
●
Drain bolt “ 2 ”
8. Install:
●
Coolant drain bolt (water pump)
9. Connect:
●
Coolant reservoir hose
10.Fill:
●
Cooling system
(with the specified amount of the recom-
mended coolant)
Handling notes for coolant
Coolant is potentially harmful and should be
handled with special care.
WARNING
EWA13040
●
If coolant splashes in your eyes, thorough-
ly wash them with water and consult a doc-
tor.
●
If coolant splashes on your clothes, quickly
wash it away with water and then with soap
and water.
●
If coolant is swallowed, induce vomiting
and get immediate medical attention.
CAUTION:
ECA13480
●
Adding water instead of coolant lowers the
antifreeze content of the coolant. If water is
used instead of coolant check, and if nec-
essary, correct the antifreeze concentra-
tion of the coolant.
●
Use only distilled water. However, if dis-
tilled water is not available, soft water may
be used.
●
If coolant comes into contact with painted
surfaces, immediately wash them with wa-
ter.
●
Do not mix different types of antifreeze.
11.Install:
●
Radiator cap
12.Fill:
●
Coolant reservoir
(with the recommended coolant to the maxi-
mum level mark
“ a ” )
Coolant drain bolt (water pump)
1.6 Nm (0.16 m • kg, 1.2 ft • lb)
Recommended antifreeze
High-quality ethylene glycol anti-
freeze containing corrosion inhib-
itors for aluminum engines
Mixing ratio
1:1 (antifreeze:water)
●
Radiator capacity (including all
routes)
1.50 L (1.59 US qt) (1.32 Imp.qt)
●
Coolant reservoir capacity (up to
the maximum level mark)
0.35 L (0.37 US qt) (0.31 Imp.qt)
1
1
2
T
R
.
.