background image

 

 

Table of Contents 

 

 

- Preface 
- For Safe Operation 
- Warnings and Cautions 
- Precautions on Use 
1. Names and Materials of Parts 

1.1 Names and Materials of Parts

 ·······································································   1

 

1.2 Contents of Package

 ···················································································   1

 

2. Principles of Operation ··················································································   2 
3. Installation 

3.1 Installing the Drum Pump

 ···········································································   2 

3.2 Installing the Siphon Pump

 ··········································································    3 

3.3 Installing the Draw Change Material Hose

 ·······················································   3 

3.4 Installing the Pressure Feed Material Hose

 ······················································   3 

3.5 Air Connection

 ·························································································  4 

3.6 Connecting the ground wire

 ··········································································   4

 

4. How to Operate the Pump ··············································································   5 
5. Maintenance and Inspection 

5.1 Troubleshooting and Corrective Measures

 ························································   6

 

5.2 Maintenance and Inspection

 ·········································································    7 

5.3 Consumable Parts

 ·····················································································   7

 

6. Pump Specifications ······················································································   8 
7. Accessory(851753 SH-110A5 type) ···································································   9

 

8. Limited Warranty ·························································································   10 

 

 
 

Содержание SH-110A5





















Отзывы: