Yale A245 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 76

background image

1. Mode 3

is the default setting from the factory.

2.

The control handle or delivery handle must be in the full

upright position, brake

ON

, key

OFF

, then key

ON

.

3.

Press and hold the horn button while turning the key

switch to the

ON

position.

4.

The horn will sound, then release the horn button.

5.

Toggle through the modes by pressing the lift or lower

buttons.

6.

The horn provides an audible indication as to the mode

selected. One beep represents

Mode 1

, two beeps repre-

sents

Mode 2

, and three beeps represents

Mode 3

.

7.

Lower the control handle or delivery handle to begin

operation of the lift truck. The performance mode selected
is stored in memory.

Traveling

There is one control for changing speed or direction and for
normal stopping of the lift truck. The control is the speed/
direction control. The control is spring loaded to the

OFF

position. The control is designed to be operated by either
hand. Rotate the control in the desired direction of travel.

Maximum rotation of the control causes maximum travel
speed.

To change direction or to stop the lift truck (regardless of lift
truck speed), rotate the control in the opposite direction.
The lift truck will come to a stop and then, unless the con-
trol is returned to the

OFF

position, accelerate in the oppo-

site direction. This is called plugging. Stop the lift truck as
gradually as possible. Rapid starting and stopping can be
dangerous as well as unnecessary.

Steering

Turn the lift truck to the right or left by moving the control
handle or delivery handle in the desired direction. Make
sure there is adequate turning clearance. When traveling in
reverse (forks first) the lift truck will move to the side when
turning. This movement is called tailswing. The operator
must be aware of tailswing and always check to make sure
the tailswing area is clear before turning.

Turning

Slow the lift truck before turning into an aisle. Drive forward
(control handle or delivery handle leading) for best visibility
and easiest handling. As the forks clear a corner, turn the
control handle or delivery handle. Entering an aisle requires

Operating Procedures

42

«
...
42
43
44
45
46
...
»

Содержание A245













































































Отзывы:

Нет отзывов

Похожие инструкции для A245

Бренд: Still Страницы: 176

Бренд: Linde Страницы: 53

Бренд: Linde Страницы: 96

Бренд: Linde Страницы: 134

Бренд: Linde Страницы: 140

Бренд: JLG Страницы: 160

Бренд: JLG Страницы: 288

Бренд: Fervi Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды